Welcome to OnlineConversion.com

Conductivity

Conductivity
by Tomas Eriksson on 06/19/05 at 11:04:10

I found the heat transfer conductivity for rubber to be:
0.094 bt/h - foot °F
and want to convert it to:
W/mē °C.

Can someone help me?


Re: Conductivity
by Robert Fogt on 06/22/05 at 08:20:07

Btu/hour foot °F is a unit of thermal conductivity, while watt/square meter °C is a unit of heat transfer coefficient.

There is no conversion between them.

You would need unit such as Btu/hour square foot °F, which is another of the same type of unit.


Re: Conductivity
by Robert Fogt on 06/22/05 at 08:28:35

I should say there is no direct conversion between them, not that there is no conversion between them.


Re: Conductivity
by Tomas Eriksson on 06/23/05 at 04:52:32

I would also think that the rubber manufacturer had written it in the wrong way. Suppose he did, then - what would
0.094 btu/h SQUARE foot °F correspond in
W/h square meter °C?


Re: Conductivity
by Robert Fogt on 06/26/05 at 00:51:41

Using the I.T. definition of the Btu,

Btu/hour square foot °F * 5.6782633 = watt/hour square meter °C

I pulled this converison factor in Measure for Measure by Richard Young.


Re: Conductivity
by Tomas Eriksson on 06/27/05 at 05:26:26

Thanks for your help!


Go Back | Archive Index

BookMark Us

It may come in handy.

Are you bored?

Try the Fun Stuff

Was this site helpful?

Link to Us | Donate