Welcome to OnlineConversion.com

gas conversion

gas conversion
by david roberts on 12/01/05 at 06:08:18

Could you give me the conversion for natural gas in cubic meters (m3 to kwh) thanks


Re: gas conversion
by Robert Fogt on 12/01/05 at 17:51:25

I found some information here:
http://www.altenergy.com/propaned.htm

Though you would first need to use the volume conversion page to convert your cubic meter value to cubic feet, then look up the Btu data on the chart, the convert Btu to kilowatt hour on the energy conversion page.

Its a bit of extra work. If its something you do all the time I could work out a direct cubic meter to kilowatt hour conversion for you.


Re: gas conversion
by boyd guildner on 12/14/05 at 20:59:44

we were given a rate of 35 kpa we reset it to ounces of water then turned it into psi came out to 5.25 psi but we needed to translate to how many btu's per hour wouldn't i also need to know size of pipe to calc btu's per hour


Go Back | Archive Index

BookMark Us

It may come in handy.

Are you bored?

Try the Fun Stuff

Was this site helpful?

Link to Us | Donate